That changed last Thursday though when Microsoft released Windows 10 Insider build 16215 to the fast ring. This build is one of the first that's been stable enough to actually run day to day since the Creators Update*, but even so, there's a few glaring bugs in the "Wot won't work" list.
First though, the changes and improvements (from the released Creators Update) which are available in this build... it's a long list, so bear with us... I've taken this list directly from Microsoft's release notes, 'cause I was too lazy to type it
Start & Action Center bring elements of Fluent Design
This build introduces new UI for Start and Action Center that includes elements of Microsoft's new Fluent Design System (website doesn't work, don't bother clicking on it) which was announced at Build 2017.
Start improvements include:
- Acrylic: If you have transparency enabled for Start, you’ll notice it’s now been updated to use the new acrylic design.
- Vertical resize: No more glitches at the bottom of the frame.
- Horizontal resize: The frame now starts resizing horizontally immediately (like vertical resize), as opposed to only “snapping” to certain widths.
- Diagonal resize: The frame can be resized diagonally!
- Resize grips: It’s now easier to “grip” the edge of the frame to start resizing.
- Tablet mode transition: Smoother transition into tablet mode.
A new look for Action Center: Action Center has been redesigned based on your feedback to provide much clearer information separation and hierarchy. And the new design for Action Center also includes elements of our Fluent Design System such as acrylic! (and in case you were wondering, we’ve also added acrylic to our notification toasts!). As a reminder, you can customize the visible quick actions by going to Settings > System > Notifications & actions.
Microsoft Edge Improvements
Pin your favorite websites to your taskbar: Pinned sites are back! We heard your feedback, and are in this build you can now pin a website to the taskbar from Microsoft Edge! We’ll use the site’s icon to give you quick access to your favorite sites right from the taskbar. Simply select “Pin this page to the taskbar” from the settings menu in Microsoft Edge.
Full screen mode (F11) in Microsoft Edge: This build introduces a new Full Screen experience in Microsoft Edge. Simply press F11 or choose the new Full Screen icon in the Settings menu to take your websites full-screen. You can exit Full Screen view by pressing F11 again, or by clicking the Restore icon in the top-right corner.
Annotate Books in Microsoft Edge: We’ve added the ability to annotate EPUB Books by highlighting in four colors, underlining, and adding comments. To get started, select some text, and choose an option from the menu.To add notes as you read, select text, tap or click the Add a note button and add your note.
Microsoft Edge PDF improvements: We’ve added more highlight colors and the option to Ask Cortana in PDFs in Microsoft Edge.
Other Microsoft Edge Improvements, including:
- Microsoft Edge’s splash page (seen when newly launched) so that the color transitions more smoothly to the Start and New Tab pages.
- We’ve added an option to “Add tabs to favorites” from the right-click context menu on tabs. Using it will create a Favorites folder with all the sites open in tabs in the current window.
- New tabs will now animate more smoothly onto the tab bar when opened and closed.
- We’ve improved session restore behavior so that when a multi-window Microsoft Edge session is restored by clicking on a link (for example, from an email), the window in focus at the end of restoration is the one containing the new link.
Taking Cortana reminders to the next level through vision intelligence: Most of us have experienced taking a picture of upcoming event poster or bookmarking an event site for future reference, only to forget about it later. With this build, we’re rolling out two new features starting with the en-us market to help you never again miss an event you’re interested in!
Cortana camera roll insights: With your permission, Cortana will now prompt you to create a reminder when she notices event posters in your camera roll! To try it out, make sure you’re signed into Cortana with your MSA or work account, and then give Cortana permission to access your camera roll via Settings > Cortana > Permissions & history > “Manage the information Cortana can access from this device”. The next time you take a picture of a flier for an upcoming event, Cortana will reach out asking if you want to create a reminder for that time.
Note: Cortana will only provide insights when your device is plugged into a power source and on an un-metered network.
Cortana Lasso: Are you a pen user? If so, Cortana can now help keep track of future events on your screen! Use the new lasso tool to circle the relevant information and Cortana will recognize the time, and offer suggested follow-ups through a context menu. Keeping track of upcoming events has never been easier! To try it out, go to Settings > Device > Pen & Windows Ink > Press and hold, and select Cortana Lasso in the dropdown picker. Find a website with upcoming event info, or an event poster someone shared in social media – once you have the event on your screen, just press and hold the pen back button, circle the time information, and watch Cortana do her magic. That easy!
Note: For this to work, your pen will need to support Press and Hold – for example the pen that came with the Surface Pro 4, Surface Book, or Surface Studio.
Evolving the handwriting experience in Windows 10
Using your feedback to evolve the handwriting experience: We’ve been hard at work incorporating your feedback, and with today’s build we’re introducing a new XAML-based handwriting panel – with more gestures, easier editing, emoji, and more!
New features include:
Write as much as you want in the panel with the new conversion & overflow model! As you write, you’ll now see your previous words convert to typed text within the handwriting panel. When you fill the handwriting panel and lift your pen off the screen, the text will shift so you have room to continue writing. Press the commit button to insert all the text and clear the slate.
Select text to edit it: See something you want to change? If you select text while the handwriting panel is open, that text will now appear within the panel so you can easily make alterations.
Make corrections within the handwriting panel by overwriting converted text: Was something misrecognized? Instead of using the suggested text alternate, you now have the option of just inking the correct letters right on top of the converted text!
Make corrections using ink gestures: Once your written words have been converted to type, or if you’ve selected existing text, you can now easily make simple edits from within the handwriting panel using our four new gestures: strikethrough, scratch, join, and split. Try it out!
Easier access to emoji and symbols: We’ve added two new buttons to the handwriting panel, so you can easily input emoji or symbols without needing to switch to the touch keyboard Simply tap the button, pick the character you want, and you’re set to go!
Reducing the chance of palm rejection: We’ve added a new setting in Pen & Windows Ink Settings so finger inking needs to be explicitly enabled – this will help avoid inadvertent ink being drawn on the handwriting panel as you’re writing with your pen.
Floating by default: While you still have the option to choose, we’ve made the decision for the handwriting panel to now by default appear next to where you’re writing. To change modes, tap the new keyboard settings menu button in the top left corner of the keyboard.
Improved handwriting recognition for English (United States): We’ve made some changes to our US English handwriting recognition engine to improve its accuracy. Would love for Insiders to try it out and share feedback on how it feels now.
English mode for Simplified Chinese handwriting: To further improve the recognition accuracy of mixed input (when Chinese and English characters are inked together), we’ve added an English mode button when handwriting in Simplified Chinese. Just press the button, ink the desired English words, and the inking done in English mode will be recognized using the English (United States) handwriting recognition engine. After your inking in English is finished, you can press the English mode button again to go back to default mode.
We rely on your feedback to let us know how this new experience is doing, and will be using your feedback to determine readiness. Please try writing some things and log feedback about the experience here. If your PC has pen support, then the handwriting engine for each language should download automatically when you add it to your language list. If it doesn’t, you can go to Optional Features and choose to download it. We’re currently investigating your reports that there’s been some lag when inputting ink in recent builds.
Find My Pen: Don’t know where you put your pen? The pen doesn’t have a GPS, so we can’t help you there, but what we *can* do is tell you where you were when you last inked on your computer. Which is what we’ve done! Head over to Settings > Update & Security > “Find My Device” to see what it’s all about.
Scrolling with pen. In the effort to create a more intuitive pen interaction on Windows, we are emphasizing natural and direct manipulation of content with pen. You don’t have to “hunt and peck” for scrollbars or frequently switch between pen and touch when navigating; now you can scroll content directly and fluently as you would with your finger. Want to see it working?
Selection with pen. We also revised selection with pen by giving it more control over the selection process. Not only are we showing selection grippers whenever text is selected via pen, but also are allowing for a consistent and fast selection of content – text, objects, or ink—by dragging the pen while the barrel button is pressed.
Note: scrolling with pen is currently only supported for UWP apps, however we’re working on adding it for Win32 as well (like File Explorer). Selection with pen isn’t yet up and running in Microsoft Edge, but it will be coming in a later flight. This will also impact selecting text with pen in epubs and PDFs in order to try the new Microsoft Edge features shown above. For now, please use another input method if you’d like to see how it works.
Hardware keyboard Improvements
Entering emoji on your hardware keyboard just got easier: We’ve heard your feedback, and today we’re happy to announce the new Emoji Panel! Press Win + period (.) or Win + semicolon (;) while focus is in a text box and the Emoji Panel will pop up for you to quickly scroll through and pick the emoji you want.
In the “People” emoji category, you can change the skin tone of the emoji by clicking the button on the top-right:
In addition to using your mouse to select an emoji, you can also navigate through the panel by using the following keys:
- Arrow keys – Navigate among emoji
- Tab / Shift + Tab – Switch emoji category
- Enter – Select an emoji
- Esc – Close the panel
Currently this emoji experience is only available when English (United States) is the active language of your keyboard. As a reminder, if you need to switch between the languages in your language list, you can use the Win + Space hotkey.
Converging the touch keyboard experience
We have a totally new touch keyboard on Desktop! If you’ve been jealous of better keyboard features on your phone, then you’ll be happy to hear with today’s build we’re bringing those familiar phone keyboard experiences to your PC with our new XAML-based touch keyboard!
This includes many popular requests we’ve heard from you such as:
Enhanced Text Prediction: We’ve made a bunch of improvements to our text prediction engine to make it more intelligent. For example, you now don’t need to type anything other than “Text ” to complete the frequently used message, “Text me when you get a chance” using the suggested words. If you’re using a UWP app, you can also now enjoy Emoji suggestions!Try it out! Type “birthday ”, “coffee ”, or “dog ” and see what happens! Prediction is currently only working with the English US keyboard, however we’re working on enabling more languages
Improved emoji experience: If you switch to the touch keyboard’s emoji view, you’ll find can now smoothly scroll through the entire contents of each emoji category, rather than page by page. You’ll also notice that any additional available emoji candidates based on your most recent word are displayed at the top in the candidate area
One-handed touch keyboard: Following extensive research on tablet postures, we’re adding a new keyboard layout to provide the most comfort when holding the device in your hands! It looks similar to a phone keyboard – smaller and more narrow. You can freely put this smaller touch keyboard wherever you want (although we recommend docked to the side of your screen ) and use it with one hand. To switch between languages, press and hold on the &123 key. Note: This keyboard takes the place of the split keyboard layout
Shape writing with the one-handed touch keyboard: One of the most powerful phone keyboard features for fast and easy text input involves swiping over the keys without releasing your finger on the screen. We call it shape writing. Today we proudly announce the first shape writing keyboard on PC! Because it’s works just like your familiar phone-style one-handed keyboard, you don’t need to do anything to learn it again. Just use it as you would use your phone’s touch keyboard. Bonus: it also works with pen! Shape writing is currently only supported for the English US keyboard, however we’re working on enabling more languages.
A new touch keyboard settings menu: Along with all our other improvements, we’ve updated the way to switch into Handwriting panel and other keyboard layouts. You can find our keyboard settings menu icon at the top left corner of the touch keyboard. It’s a one-stop settings panel for all the layouts (Default, One-handed, Handwriting, Full) and modes (Docked, Floating), as well as a shortcut for jumping to language settings.
As we light up these new keyboard experiences, it’s very important that we receive your feedback to help make improvements and ensure we ship a polished experience to Windows users. If you have a touch or pen capable device, please take a moment to try it out in any languages that you speak and give feedback in as much detail as possible. Our readiness decision will be based on what you tell us. (PS – don’t forget you can move the keyboard around when it’s undocked by dragging the move icon in the top right corner!)
Please note the touch keyboards for Chinese, Japanese and Korean languages are not working with this build – we will fix this as soon as possible in an upcoming flight.
Dictation on the Desktop: Our keen-eyed Insiders may have noticed a microphone button in the touch keyboard pictures above – that’s because you can now use dictation to input English or Chinese text on desktop! Simply tap the microphone button in the top left corner of the touch keyboard or handwriting panel, or press the new dictation hotkey Win + H to start dictating. Currently only available for English (United States) and Chinese (Simplified) input methods.
Besides dictating text, you can also use voice commands to do basic editing or to input punctuations. Below are some examples of English dictation voice commands:
- Say “press backspace” to inject a backspace character
- Say “clear selection” to unselect the text that has been selected
- Say “press delete” to inject a delete keystroke
- Say “delete that” to delete the most recent speech recognition results, or the currently selected text
- Say “delete last three words” to delete the last three words
- Say “stop dictating” to terminate the dictation session
- Say “end spelling” to terminate spelling mode
- Say “go after <word or phrase>” to move the cursor to the first character after the specified word or phrase
- Say “go to the end of paragraph” to move the cursor to the end of the paragraph
- Say “move back to the previous word” to move the cursor to the left side of the previous word
- Say “go to start of <word or phrase>” to move the cursor to the first character before the specified word or phrase
- Say “go to the start of paragraph” to move the insertion point to the start of paragraph
- Say “go down to next sentence” to move the cursor forward to next sentence
- Say “go to the end of the sentence” to move the insertion point to the end of the sentence
- Say “move to the start of the word” to move the insertion point to the start of the word
- Say “go to the left” to inject a left arrow into input
- Say “move right” to inject a right arrow into input
- Say “select <word or phrase>” to select the specific word or phrase
- Say “select that” to select the most recent speech recognition result
- Say “select next three words” to select the next three words
- Say “start spelling” to switch to spelling mode
- Say “comma” (or “period”, “question mark” etc.) to input the punctuation “,” (or “.”, “?”, etc.)
Enhancing your Share experience: We want sharing to be easy and natural. With the last build we added people-first sharing, and with this build we’re bringing another new Share feature to your desktop:
Copy Link: Don’t see the app you’re looking for in the Share UI? If you’re sharing a link – like a website in Microsoft Edge, or an app from Store – we’ve added a new option in the Share UI to copy that link to your clipboard, so you easily can paste it into your app of choice.
New local media folder detection for UWPs: Photos, Groove Music and Movies & TV all have one thing in common: exploring your local content based on the folders you provide. We’ve heard your feedback that sometimes local media is missing as a result of folders not being included, so with this build we’re adding new logic to address this. After a storage scan, we will now detect relevant media folders you might want to include in your collection when looking at the files via UWP apps, and suggest them to you when you go to add new folders. Want to try it out now? Add a new folder with 30+ pictures, songs, or videos to your desktop. Go to Storage Settings and press the refresh button to trigger a scan. The next time you go to add a folder to your favorite UWP (such as Groove Music), you’ll see this new experience:
Note: If no new media is detected, you will see the file picker dialog.
My People Improvements:
- We fixed an issue where the icons of contacts pinned to the taskbar would appear cut off when using small taskbar icons.
- We’ve updated our logic so that if you have the My People flyout open, you can now drop a file onto any of the contacts pinned in the overflow area to initiate a share with them.
- We’re updated the sound made when you receive an emoji from one of the contacts pinned to the People bar in the taskbar.
- We improved My People reliability and fixed an issue where hit testing would become offset after adding or removing items from the systray.
Night light improvements including:
- We fixed an issue where mirroring a display and then disconnecting from it would break night light on that screen.
- We fixed an issue where when night light had been manually enabled, and the device entered then exited S3 sleep, night could then become disabled.
- As a result of your feedback, we’ve updated our logic to now use a quick transition into night flight if applicable after rebooting or manually enabling night light.
New Video Playback Settings: Head to Settings > Personalization > Video Playback and you’ll now find some additional controls for media enthusiasts. If you have an HDR monitor, we’d love to hear your feedback on how video streaming feels when these new options are enabled. We’ve also added some battery settings for you to decide whether you’d prefer to optimize video streaming for battery usage or video quality.
Note: You’ll noticed a “Unsupported video type or invalid file path” error at the top of the page. This is a known issue we’re looking into, it shouldn’t otherwise impact the usage of these settings.
A new HDR and Advanced Color Settings Page: If you have at least one connected display that supports HDR, you’ll now see some additional information! Go to Settings > System > Display > “HDR and advanced color settings” to find more details about the HDR settings of the currently selected display.
Per-App Defaults Settings Page: In the past, when using Settings you had to start with your file type or protocol if you wanted to make a change to the default app. That’s changing with this build, and you can now start with your app, and then see the available options for what it can handle. To see this new option, go to Settings > Apps > Default apps > “Set defaults by App”. Choose an app and click ‘Manage’ to see all the file types and protocol associations for which the app is the default. This page takes the place of the one that had been available in Control Panel, as part of our ongoing effort to converge the settings experience.
Updated Network connection properties page: We’ve heard your feedback that setting a network profile to public or private isn’t discoverable, so we’ve updated the Network connection properties page to make it easier and prominent. Instead of the previous toggle under “Make this PC discoverable”, you’ll now find two radio buttons to select whether the profile should be public or private.
A new context menu for Wi-Fi networks in the View Available Networks flyout: To get you where you need to go faster, we’ve added a new context menu full of quick actions when you right-click one of the listed Wi-Fi networks. Options include Connect, Disconnect, View Properties, or Forget Network.
Windows Update improvements:
View your active Windows Update policies: If there are any applied group policies for Windows Update, a page will now appear in Windows Update Settings so you can look through them.
Understanding your updates: We now list out the individual update status and progress in Settings > Update & Security > Windows Update. So if there are multiple updates pending (for example, a new build, a driver update, and a definition update for Windows Defender), you can see and track each different status, which wasn’t as obvious with the single progress bar used in prior builds.
Other improvements in Settings include:
- You can now add other AAD work/school users from Settings.
- We’ve heard your feedback, and have adjusted the order of the Settings categories so that the new Cortana category is now more central, and the Windows Update category is now once again the final one in the list.
- When moving or uninstalling an app from the Apps & Features Settings page, you’ll now see a progress bar.
- We fixed an issue where pinned secondary tiles would appear as groups in that app’s Notification & Actions Settings.
- We fixed an issue resulting in garbled characters when viewing the new tips in Settings on non-English languages
Game bar improvements:
- Based on your feedback, the Game bar (Win + G) now has a button to enable or disable Game Mode for the current game. Its icon will be updated soon in a future flight.
- The Game bar (Win + G) now allows you to take screenshots of games running in HDR. Sharing those screenshots to Xbox Live using the Xbox app will come in a future update of the app. Note: broadcasting does not support HDR. Screenshots will be taken in the resolution of the game window, which enables the 4K screenshots that are now supported. Game Clips and broadcasts will be transcoded to 1080p if the resolution is higher than that.
- Screenshots of games running in HDR should now correctly save a copy in PNG that is tone mapped to SDR.
- Bitrate changes during game broadcasting to Mixer should now be smoother and more seamless.
- When broadcasting to Mixer, you can now specify the language that you are speaking during the broadcast.
- The resources made available to games running in Game Mode have been tweaked on popular machine configs, including 6 and 8 core CPU machines, resulting in improved game performance for games running in Game Mode.
If you missed our announcement introducing Mixer and all the goodness along with it, check it out here!
Per app Runtime Broker: If you open Task Manager, you will notice UWPs now use per-application instanced Runtime Broker processes, rather than all sharing a single session-wide Runtime Broker. This will help improve resource attribution, resource management, and fault tolerance.
Windows Subsystem for Linux (WSL) no longer requires Developer Mode! Previously, you had to enable Developer Mode (Settings -> Update & Security -> For Developers) in order to run Bash & Linux tools on Windows. This restriction has been lifted; you can now run Bash on Windows without developer mode being enabled! More information here
Hyper-V gets virtual battery support: You can now see your machine’s battery state in your VMs! To try this feature, create a new VM using the “New-VM” cmdlet, and add the “-Prerelease” flag. This will give you a pre-release VM that will have this feature enabled.
Other improvements including:
- Registry Editor is now per-monitor DPI aware! That means it should no longer be blurry when used in mixed DPI environments, or when changing DPI.
- We fixed an issue resulting in VIM being broken for Windows Subsystem for Linux (WSL) users in result flights.
- We fixed an issue where the choice command was failing when run in a Command Prompt script.
Ease of Access Improvements:
- Scan Mode on By Default: The largest change that you will experience is that Scan Mode is now on by default. This means that:
- Up and Down Arrows to get through everything: You can simply use the up and down arrow keys to get through all of the content of your application.
- Press Space to Interact: To interact with simple controls (such as buttons, checkboxes, toggle buttons etc. you can press the space bar).
- Editbox Switching: If you navigate to an edit field using the up and down arrows, Narrator will automatically turn off Scan Mode so that you can type into the edit field. When you are ready to exit the edit field you can use the up and down arrows to exit the edit field and Narrator will turn scan mode back on.
- Turn off Scan Mode with Caps + Space: If you want to turn off scan mode, and want to get back to the old way of doing things, press Caps + Space. It will be turned off for that app and you will hear “Off”.
- Remembering the state of scan mode by application: If you explicitly turn off scan mode, by pressing Caps + Space in an application, this choice will be saved in an exceptions list so that when you reopen the application Scan Mode is off. To remove this application from the exceptions list you can press Caps + Space again
- Left and Right Arrow to move by character: Left and right arrows will move you by character
- Since Scan Mode is now on by default, we’ve removed the popup dialog when first launching Narrator explaining how to start scan mode.
- Narrator Input learning: This will allow you to learn the keys on your device. Narrator will tell you the key that you have pressed, and the Narrator command associated with it. This mode can be turned on and off with Caps + 1.
New and improved hotkeys:
- To read from where you currently are through the rest of the application you can press Caps + R for Read.
- To jump to the beginning of an application you can now press Caps + Home and to jump to the end of an application you can press Caps + End.
- The read window command, Caps + W also had some improvements in this release. Caps + W will now read both the controls in the window and the text.
- Narrator Getting Started User Guide: There is now a button in the main Narrator UI to the Narrator User Guide located here, where you can find more information about scan mode and all of the Scan Mode commands.
Braille improvements: Narrator users can type and read using different braille translations, choose a blinking cursor representation, and choose the duration of “flash messages”. You can also now perform braille input for app shortcuts and modifier keys, which enables you to use your braille display for common tasks such as:
- Pressing the Tab key
- Pressing the Escape key
- Pressing the Windows key
- Pressing sequences like Win + U to open Ease of Access Settings
- Pressing sequences like Alt + F to open the file menu
- Pressing sequences like Ctrl + S to save
- Pressing sequences like Ctrl + Alt + N
- Using first letter navigation in lists
- And more!
For the app shortcuts, there are also new commands to perform that input. Here’s a list of example commands (Braille dots = Keyboard input):
- Space + dot4 + dot5 = Tab key (Tab key)
- Space + dot1 + dot2 = Shift + Tab key (Set skipping of blank braille windows on/off)
- Space + dot2 + dot3 + dot4 + dot5 = Alt + Tab key (Set track screen cursor on/off)
- Space + dot2 + dot4 + dot5 + dot6 = Windows key (Set sliding braille windows on/off)
- Space + dot1 + dot2 + dot3 + dot5 = Windows + Tab key (Set autorepeat on/off)
- Space + Routing Key 1 – 12 = F1 – F12 keys
- Dot7 = Backspace key
- Dot8 = Enter key
- Space + dot2 + dot6 = Escape key
- Space + dot3 = Cursor left key
- Space + dot6 = Cursor right key
- Space + dot1 = Cursor up key
- Space + dot4 = Cursor down key
- Space + dot2 + dot3 = Page up key
- Space + dot5 + dot6 = Page down key
- Space + dot2 = Home key
- Space + dot5 = End key
- Space + dot3 + dot5 = Insert key
- Space + dot2 + dot5 + dot6 = Delete key
Inject and hold one or more modifier keys followed by another letter or key:
- Space + dot8 + dot1 = Hold Windows key
- Space + dot8 + dot2 = Hold Alt key
- Space + dot8 + dot3 = Hold Ctrl key
- Space + dot8 + dot4 = Hold Shift key
- Space + dot8 + dot5 = Hold AltGr key
- Space + dot8 + dot6 = Hold Caps Lock key
- Space + dot8 + dot7 = Un-hold all modifiers
Introducing Color filters: Windows 10 now includes color filters at the system level, including filters designed to make it easier for people with color blindness to differentiate between colors like red and green and to make it easier for people with light sensitivity to create and consume content. You can find these new filtering options under Settings > Ease of Access > Color and High Contrast” (previously called High Contrast Settings).
Magnifier UI improvements: We’ve updated the Magnifier zoom in and out buttons to have a more modern style.
* One of the "known issues" in this build is that it will disable wireless networking on some devices, due to a driver bug. Microsoft's solution to this is to "revert to an older build". Nice one, Microsoft!